Welcome to PhotoFrost.
Solo espaƱol 352-441-5384

Refilling PhotoFrost Edible Color Cartridges

Place the orange cap back on the bottom of the cartridge, Peel the label up on the rear of the cartridge (label says "push"), remove the black rubber plug, inject your new PhotoFrost color into the hole where the plug was, fill the reserve side completely full, let the cartridge sit for 5 minutes, then top off the color again. Replace the black rubber plug. Now your cartridge is full and ready to use again.

(we recommend only refilling your cartridge 4 times before replacing them)


Changing the Paper feed on your Printer (may not work on all models)
To change paper feed from default tray setting to rear feed follow these instructions

  1. Arrow Right to Setting (or push setting button if you have one)
  2. Press OK
  3. Arrow Right to Device Setting
  4. Press OK
  5. Click on Plain Paper Feed Setting
  6. Press OK
  7. Arrow up to highlight Rear Tray
  8. Press OK